Sweatshirt to Jacket Transformation for a "Tween"

Here's yet another sweatshirt to jacket project.  I bought this sweatshirt from Nancy's Notions, along with several others, on sale.  I used the quick fitting method on this very fast jacket project.

Source

When I went to the Quilt Festival in Houston a few years ago I bought some Fusible Stay Tape (pictured above) from Londa's Creative Threads booth, as well as some of her books.  This Fusible Stay Tape is so easy to use - it is narrow (unlike others I found) and stabilizes the knit fabric by simply fusing it (fusible on one side only) so no stay-stitching is required.  There are two types: "Knit" and "Straight".  I use the "knit" tape on necklines or curved areas.  I use the "straight"  tape on front openings (after cutting open).  Before I found this product I "tried" to stabilize with fusibles, but couldn't find anything narrow enough.  There is a LOT in each package.  I still haven't used it all yet.

Since this jacket was for a "tween" I used sweet and fun flower appliques from BunnyCup Embroidery.  It was free! It stitched out very nicely and I resized it with no problems.  It's amazing how many free designs are out there.

The brown print was a small amount  bought years ago to "audition" for baby bedding.  It was ultimately not used for that purpose and I've since used just about all of it up.  I had just enough for this project.  I didn't have quite enough for true bias tape, so I had to make due with simple foldover.  If you look closely at the neckline you can see that bias would have been better, but... I used the same fabric as a ruffle at the sleeve.

Closure detail

In this close-up of the closure you can see that I used a black hair elastic and two covered buttons.  The one on the left anchors the elastic and the one on the right is the one the elastic goes around to secure. (not sure if that even makes sense, but it's late).  I love covered buttons and they're so easy and cheap to make!

Close-up of the appliqued flowers.

Hearts and Flowers Sweatshirt Jacket Transformation

This jacket was a lot more involved than the past couple of projects I have posted on.  I used the method whereby you cut off the sleeves, then cut out an actual sleeve pattern piece and sew it all back together.  The fit is much better using this method. 

If you wonder why even start with a sweatshirt, why not buy fabric?  Buying a sweatshirt is usually cheaper than hunting down the fabric if you can even find the color fabric you want.  Plus you get the color-mtched ribbings to use on your project or save for another use (for kids' projects for example). 

I didn't have a pattern for the jacket, but I did find some on the internet to use as inspiration. 

I have a machine embroidery design set which I used for the heart/flower applique called "Best Friends Forever" by Friend Folks.  It was pricey - $39.99 - by far the most expensive machine embroidery design set I've bought.  I knew that I wanted to use it for this jacket project the minute I saw it.  I also have in mind that I will make a quilt.  There are 9 different designs.  The only thing I don't like is that there's only one size - 6x10, so you can't size it smaller for kids outfits for instance.  Oh, one other thing, the pictures show quilting but the design disk does NOT include the quilting stitches, which I find to be a little deceptive.  The quilt pattern and instructions are included on the disk.  Even without the quilting stitches, I love the way they turned out. I had some buttons which I used as the flower centers.  The designer sells matching buttons, but I just didn't want to spend any more money.

This jacket morphed as I went along.  Since I didn't have a pattern I kept thinking of things I wanted to add.  I decided I wanted a collar, and ruffled edges, and so on.  I didn't have a pattern for the collor.  I just drew one freehand using the sweatshirt neck as my guide.  I used minky for the collar and cuffs.  The collar is lined in pink cotton and the cuffs are lined in minky.  I got hung up on the sleeve cuffs and tore them out and changed my mind a couple of times before I finally ended up with the plain cuff.

Sweatshirt to Vest Transformation in Aqua, Grey and Red

Here's another Sweatshirt Transformation project I made at Christmas.  For this one, in the interest of time, I decided to make a vest.  I had bought a jellly roll in taupe, grey, aqua, red and green at the Quilt Festival.  It's called Blitzen by Moda.  (I hoarded that jelly roll but couldn't bring myself to open it up for a long time.) 

I wanted a plain grey sweatshirt as the base, which I didn't have on hand (pink, brown, slate blue, etc etc. I have, but plain grey, no) so I went to wally world for a cheapie.  I found an aqua one, which turned out to be perfect for this project!  I think I paid $5 for it.  I prewashed and dried it, cut off the ribbing and sleeves,  then ironed on stabilizer tapes on the cut edges.  I tried it on inside out and marked and trimmed the arm openings till they looked like what I wanted.   I then cut open the side seams.

I started applying the jelly roll strips in the center back.  I just stitched it down.  Then I added a strip on each side till I had the back covered.  I did the same on the front, starting in the center front. I did 'audition' the strips and had an idea of where I wanted each to go before stitching.  After the strips were stitched on, I stitched up the side seams and serged.  I  made foldover trim for the neck and arm openings out of one strip so they would all match.  No, I didn't make bias strips - I only had jelly roll strips to work with, no yardage and anyway, I'm pretty lazy so even if I had the yardage I wouldn't have made bias tape.  For the bottom edge, I combined a few strips of a similar color to make a long enough piece.  (If anyone wants detailed info on the construction process let me know.)

In the picture above you may note the patch on the back, under the neckline.  The sweatshirt had a label ironed on right there and I didn't want to see "Hanes Size XXXX" so I cut a piece of a strip to fit, turned under the raw edges and used Wonder Under or Heat N Bond to fuse it in place.  Looks a lot better to me.

The bottom edge is shown below.  I used a stitch in the ditch method to finish off the foldover trim.  On the left side you can see the inside of the sweatshirt.  I used a matching thread in the bobbin and a taupe in the needle.

Sweatshirt to Jacket Transformation in Slate Blue and Grey

For some reason I am enamored with transforming a sweatshirt to a jacket.  I have no idea why.  In the hot Texas climate I don't even get to wear them much.  Nancy's Notions had a sale a while back on sweatshirts so I bought several, which have been languishing in the fabric stash closet.  I hoard fabrics and supplies until a project worthy of their use comes along (silly to say that about a sweatshirt I know).

We had a trip planned to Arkansas the day after Christmas and I knew the weather would be really cold (in fact it snowed and we drove through an ice storm) so I thought it would be the perfect time to make some sweatshirt jackets.  The one pictured here is so fast to make I literally made it on Christmas Day, after we celebrated Christmas and before I had to pack for our trip.

In a nutshell, when making a quick sweatshirt jacket, you pre-wash everything and dry first of all.  Then cut off all ribbing, apply two strips of iron on stabilizer to center front and neck edge, cut open the front and try on, inside out.  I then pink under the arm to take up the excess fabric so that it fits better.  This is the easiest way to convert a sweatshirt into a jacket.  The other way involves cutting off the sleeves and reconstructing it, which is more work but it fits better.

After the jacket fits, apply the fashion fabrics.  It's basically a quilt as you go method.  I started with the lighter strip at the bottom of the jacket and stitched it directly to the sweatshirt, on the top and bottom of the strip.  I then took the dark grey strip, turned under the raw edges and pressed and then opened out one edge and pinned it, right sides together, over the raw edge of the bottom strip, and then stitched in the crease.  I finished off the top edge with a blanket stitch.  (If anyone wants more detailed info on construction let me know.)

To encase the raw edges I made double fold strips out of another fabric.  I know I SHOULD have made bias, but I was in a big hurry.  The only place this is really an issue is the neckline but for a quick project I just didn't want to invest the time.  I bound the neck edge and sleeve edges first, then the bottom edge, and finally the front.  I had a cool oversize wooden button that I wanted to use and for the button loop I used a brown hair elastic.  I have gotten so many comments on this jacket and the funny thing is it cost about $15 and took about 2 hours!  It works great to layer over a turtleneck but isn't so bulky that I can't wear a coat over it as well. 

A little on the Wild Side

I've been wanting to make a Sweatshirt Cardigan/Jacket for myself for a while now. I bought a supply of sweatshirts from Nancy's Notions when they were on sale. They were around $11 each. They come in just about any color and they fit comfortably and reliably.

Last year my friend Beth and I went to a quilt store and took an informal class on sweatshirt to cardigan transformation. My jacket turned out cute but since I started with a white Wal-Mart sweatshirt it never fit quite right. I found, after buying a couple more, that Wal-Mart sweatshirts shrink (in all the wrong places) and are NOT true to size.

After washing and drying the sweats from Nancy's Notions they still fit perfectly. I bought an XL and after cutting the ribbing off, I had to cut the sleeve length by a few inches and take up the underarm seam. Otherwise I had no fitting issues. I chose not to make a fitted jacket but I could have added darts (maybe on another one).

So I had this pile of sweats to choose from ... where to start? I had made Caroline an embroidered 3/4 sleeve t-shirt for Christmas, starting with a brown shirt and appliques out of brown "pleather", giraffe print and cheetah print. I liked the way it turned out so I decided to start with the same design for my jacket.

This jacket was basically made just like the one I made for Journey for Christmas. I cut off the wrist, waist and neck ribbing, and cut down the center. I used fusible interfacing to stabilize the neck and front opening. Next time I'll just stay stitch.

I only had a small amount of the trim fabrics so I had to use them wisely. I made bands to go around the bottom of the jacket as well as the sleeves. I used the last little bit of the cheetah fabric for neck and front binding. The cheetah and giraffe are knit prints I got at JoAnn's and were easy to work with. I bought the faux leather at a yard sale. {Sidebar note: I made a Roman Shade for my bathroom window out of this pleather because I got it cheap and I had a lot of it but word to the wise: you DO NOT want to try to iron it, so pick a project that doesn't require a lot of pressing.}

I sewed the first band to the bottom edge of the sweat so that I folded it to the right side and it was hemmed. I then basted the pleather band in place, then topstitched the animal prints to it. That was all very quick and easy.

Sleeve detail:

In order to sew the bands to the sleeve, it was necessary to rip the sleeve seam up above where the highest band would be stitched, then stitch the seam back together when done.

After all the bands were in place I could see where the appliques would go. I knew I wanted three stacked crosses appliqued on the back, which I did first. Because I used really large appliques it took two hoopings. In order to avoid "hoop burn" I secured the jacket by first using iron on stabilizer on the inside back of the jacket, and sticky stabilizer in the hoop. I then just placed the jacket on the hoop, smoothed it in place and pinned securely.

I chose a simple zig zag finish for the appliques. This particular design also comes with a satin stitch and a "vintage" stitch as well, but I wanted fast and easy so zig zag was the way to go. I went around the edge twice. For the front I used the same design, but in a smaller size.

I then added hot-fix crystals in a brown/copper color.

Jacket back: